BELOW ARE SOME PRINTABLE ACCESSORIES THAT CAN BE USED TO ENHANCE THE USABILITY AND EFFICIENCY OF YOUR IFD-175 FILAMENT DRYER. IF YOU DESIGN CUSTOMIZATION’S FOR YOUR SPECIFIC PRINTER, WE ENCOURAGE YOU TO SHARE WITH THE WHOLE MAKER COMMUNITY ON OUR MEDIA OUTLETS AND HERE ON OUR WEBSITE’S DOWNLOAD PAGE. PLEASE PROVIDE THE FOLLOWING INFORMATION WITH ANY SUBMISSIONS:
- STL file of your design
- Picture of it in action
- Print envelope specifications
- Recommended print material
6 MM GANTRY MOUNT FOR IFD-175 AP & EX DRYERS
This mount fits any 6mm thick aluminum gantrys typically used by Prusa and Matterhackers.
20MM GANTRY MOUNT OR IFD-175 AP & EX DRYERS
Use this mount on any 20MM wide gantry. The 20mm is very common with many bed slinger printers.
IFD-175 AP & EX DRYER MOUNT FOR FUSION 3 410 PRINTERS.
UNIVERSAL SIDE MOUNT FOR IFD-175 CONTROL UNIT
SAVE COUNTER SPACE!!
This mount can be used with any 3D printer that has a containment case.
IFD-175 AP and EX MOUNT FOR THE ELEGOO NEPTUNE 4 SERIES PRINTERS.
This adapter allows our EX and AP dryers to mount on top of any Elegoo Neptune 4 series printers. Since the dryer is right on top of the direct drive, there is no purging of wet filament necessary.
IFD-175 AP and EX MOUNT FOR THE BAMBU A1 AND A1 MINI PRINTER.
This two piece adapter allows our EX and AP dryers to mount on top of the Bambu A1 and A1 mini direct drive hotend. Since the dryer is right on top of the direct drive, there is no purging of wet filament necessary.
IFD-175 AP CLIP-IN MOUNT FOR BAMBU LAB X1 CARBON
The IFD-175 AP heater mount for the Bambu Lab X1 Carbon gives you a quick-detach design positioned on the back of the printer that works along with your AMS. The unit clips in at the ends to attach while the mount itself attaches to the printer with a double-sided adhesive.
IFD-175 EX CLIP-IN MOUNT FOR BAMBU LAB X1 CARBON
The heater mount for the Bambu Lab X1 Carbon gives you a quick-detach design positioned on the back of the printer that works along with the AMS. The unit clips in at the ends to attach while the mount itself attaches to the printer with a double-sided adhesive.
IFD-175 AP AND EX MOUNT FOR PRUSA, PULSE XE, OR ANY PRINTER WITH A 6MM THICK SINGLE PIECE GANTRY
This mount is designed to attach the IFD-175 EX Drying Unit to any 6mm or 1/4″ thick single piece gantry similar to Prusa and Matterhackers Pulse EX printers.
UNIVERSAL REMOTE DRYER MOUNT
This Remote Dryer Mount attaches to your printer in the best position while providing the smoothest feed of dried filament into your hot end.
- Print envelope: 92mm x 25mm x 35mm.
- Material: PLA or ABS.
GANTRY MOUNTED DRYER HOLDER
Doug O. designed an awesome vertical dryer mount for his Creality Ender 3. The design looks like it’ll also work on pretty much any gantry style printer.
CLICK HERE to see more pics, specs, and download the STL file from thingiverse.com.
VERTICAL DRYER MOUNT
Garbiel C. Not only submitted a fantastic mount design but also had some great things to say about his IFD-175R.
“I operate my Ender 3 V2 in my garage. I currently don’t have an enclosure and it resides on a workbench out in the open environment subject to outdoor weather. I live in Los Angeles near the beach and it is always moist here. I run my machine almost 24 hours a day and the spool of material stays on top of the machine until the material is completely consumed. I had issues with gaps, pockmarks, stringing and layer adhesion. You could hear the popping and sizzle clearly during a print. With all things in my setup being the same, this has seemingly eliminated all those issues and left me with a clean part on my most troublesome component, on the very first print! I’m impressed. My point of view has always been that this was not intended to be a miracle cure for bucket soaked filament, it is a method of assuring well respected material is consistently dry when it enters the extruder. It appears to do that flawlessly. Bingo.”
CLICK HERE To download this design from Thingiverse.com.
DESKTOP CONTROLLER
Jerome B. designed this cool mount for his Robo R1 and discovered that it also works great as a standalone desktop mount for our IFD-175R.
CLICK HERE to see more pics, specs, and download the STL file on thingiverse.com.
Filament Feed Accessories
SPOOL RINGS FOR CARDBOARD SPOOLS
These rings fit on the outer rim of cardboard spools to allow you to use cardboard spools in your Bambu Lab AMS.
SPOOL BALANCER FOR CREALITY ENDER 3
A spool balancer designed to fit a standard Creality 30mm diameter spool holder which significantly improves smoothness of filament feed.
BOWDEN TUBE BENDER
The bowden tube bender is designed to allow the tube to snap in securely while forcing the tube to a 2″ (50.8mm) radius.
GANTRY MOUNT BOWDEN TUBE HOLDER
A gantry mount Bowden tube adapter is another great accessory for helping maintain a smooth path between your filament spool and the IFD-175 Drying Unit.
It is designed for the Creality Ender 3 but will fit any 20mm (.787″) bar.
TOPSIDE SPOOL CADDY
A spool caddy that, additionally, mounts to the top of your IFD-175 control.
- Maximum spool capacity is 2kg.
- Print envelope 185mm x 146mm x 98mm.
- Three #4 x 3/4″ self-tapping screws required.
- Material: PLA or ABS.
UNDERSIDE SPOOL CADDY
Your IFD-175S control box nests on top of this compact and stylish caddy while your spool of filament feeds into it directly from below.
- Eight printed pieces.
- Maximum spool capacity is 2kg.
- Print envelope: 230mm x 210mm x 120mm.
- Material: PLA or ABS.
Control Box Mounts
UNIVERSAL CONTROL BOX SIDE MOUNT #1
The Control Box Side Mount #1 attaches to your printer with screws or double-sided tape While the IFD-175 control box slips in on its side. The “T” notches are for a rubber band to hold the box in place.
- Print envelope: 190mm x 76mm x 124mm.
- Material: PLA or ABS.
ENCLOSED CASE SIDE MOUNT
For those with enclosed cabinet 3D printers, this IFD-175 control box mount can add another mounting option. It attaches with two screws from the top or with double sided tape.
- Print envelope: 185mm x 109mm x 30mm
- Material: PLA or ABS
